Michelin unveils its 3D printed Airless Tyre. Imagine a tyre that never punctures, never needs replacing, can be adapted for different road conditions and which lasts as long as your car.
Michelin’s new concept tyre lets you Imagine a future in which your tyre is also a wheel: puncture-proof because there is no pressure. Its ruggedness comes from its biomimetic structure as if it had been created by Nature. A wheel made of recycled materials and which is completely recycled at the end of its life, after having covered thousands and thousands of kilometres – as long as the vehicle itself.
Now imagine that you don’t have to worry any more about keeping your loved ones safe when you travel, because road conditions and bad weather don’t matter any more. The tyre tread instantly adjusts to your driving conditions, whenever necessary, using just the right amount of materials. A tread that can be modified and replenished at will, without wasting any resources, time or money, and which protects the environment for the generations to come.
What is Michelin’s Visionary Concept?
A wheel with no air, designed to last as long as the vehicle.Many of the materials they’re made from are derived from petrochemicals, at considerable cost to the environment. And as we can see from the tyre fragments on every motorway, those materials stick around in the environment long after their useful life is over.So Michelin wanted sustainability to be a vital strand in its concept tyre. Accordingly, the tyre is constructed from natural or recycled materials.The combination of materials means that the tyre will be far more recyclable, and fully biodegradable.
The Honeycomb Construction
The Vision’s construction is unlike anything in the market today. Michelin’s designers looked to nature for inspiration, and developed a honeycomb-like structure that requires no air gaps to provide cushioning. Instead of fitting around the wheel, the designers intend the Vision to replace both tyre and wheel.
Michelin’s concept tyre would also make full use of 3D printing technology. This would bring motorists two massive advantages. Firstly, it’s a much more efficient system, because rather than needing a whole new tyre, only the lost material is replenished. Secondly, it means the tyre can be easily adapted to current driving conditions more easily.
Manually inspecting your tyres may become a thing of the past too, as sensors within the tyre will provide continuous feedback on its condition.
Budget Tyres are usually priced way lower than a mid-range or a premium tyre.There are a lot of players who produce Budget Tyres. These tyres are often made by smaller and lesser-known brands, using materials and processes that aren’t of as high a quality as tyres made by premium manufacturers. They are therefore a lot more affordable, but of significantly lesser quality than more expensive tyres.
However, it should be noted that budget tyres still have to meet required safety standards, so you can at least rest easy knowing that you’re not driving around on any old piece of rubber. That said, while premium manufacturers will go to lengths to exceed standards, budget tyres will only meet the minimum requirements and will not have the performance or longevity due to low-quality material/technology used. These usually last for a maximum period of 2 years compared to premium which lasts a minimum of 5years and can extend based on utility and usage.
Budget Tyres Advantages and Disadvantages-
This only has one advantage and that is the pricing of the tyre which is way lower than other major brands.
There are quite a few disadvantages with budget tyres- Less durable, low performance, lower quality, lesser control/handling and would not last for more than 2 years.
Tyresnmore recommends going for Premium Tyres as this would be a bit more expensive but would guarantee safety, performance and longevity of tyres.
Need help with replacing tyres? Buy Tyres Online or Call now! 9212751275 for expert advice!
Nitrogen technically has some scientific advantages over air. Let’s take a closer look at some of the factors in the argument and see if we can help you decide which is right for you. The idea is just new to consumers, here is a look at the benefits from adding nitrogen to your tyres-
Longer Tyre Life-
Nitrogen is less likely to seep through the rubber, this feature helps in avoiding deflation of tyres and keeps the tyre pressure more stable over the long term.
Keeps tyre Cool-
Nitrogen has properties which help the tyre stay cooler and does not heat up easily compared to Air.
Nitrogen stays longer in tyres-
Air pressure in tyres usually wears off in a week or 10 days. However, Nitrogen has the capacity to last almost one month in tyres without depleting.
Maintain Constant Pressure-
Nitrogen-filled tyres are less prone to temperature swings, so the tyres are more likely to maintain constant pressure under a wide variety of temperatures and vehicle speeds
Perfect for Heavy Vehicles-
Just about every race car, airplane, and heavy equipment tyre is filled with nitrogen. These vehicles subject tyres to extreme temperature conditions, and the use of nitrogen allows better control over tyre pressure as temperature increases. Compressed air holds moisture and the amount of moisture may vary. During extreme usage, the amount of moisture in the tyre causes the tyre temperature to increase more rapidly, and in a non-linear way that can be unpredictable.
Oxidation is blocked-
Oxidation can make rubber brittle, increasing the chance of a blow-out. Nitrogen in the tyre blocks the oxidation of the internal rubber and avoids a blow-out.
Tyres are often the most neglected things on our cars, but we should take better care of them because this could be life-saving. Treadwear indicators mean the projections within the tread grooves designed to give a visual indication of the degree of wear of the tread.
Treadwear indicator bars are moulded into the tread grooves at regular intervals around the tyre to indicate when a tyre is worn to its limit of safety. The minimum legal tread depth is 1.5 mm across the width of the tread. When the tyre is worn to the legal limit the bars will be flush with the surface of the tread. While that is the legal requirement some car manufacturers recommend you replace your tyres before they wear to that extent. When it comes to checking the tyre tread, there are a number of methods that can help you understand when you need replacing. Heavily worn tread will prevent a tyre from performing as designed and can lead to unsafe driving conditions.
The simplest and the most effective way to check tread depth requires a coin and a few moments of your time. This is called the Penny Test-
In the above example, place a coin near the indicator and check the depth. If the coin is covered by more than half of its size as seen above, then this means that the tread is still not worn out. Or if the coin is out and there is no depth then this means that you need to replace your tyre immediately as the tread is worn out completely.
Need help in replacing tyres? Buy Tyres Online or call us now! 9212751275 for Expert advice!
Car maintenance is crucial for every car owner and can sometimes become a daunting task. However, failing to carry out regular checks on your vehicle can have dangerous and often costly consequences. These common checks will ensure safety, performance and longevity. Here are some car maintenance basics every driver should know.
- Fluid Levels in Check-
Engine fluid levels should be looked at at least every couple of weeks or before long trips.Most of the fluids have gauges or dipsticks with minimum and maximum marks so you can easily see the optimal level. If the fluid reads as below the minimum marker, top it up as soon as possible. When checking fluid levels, make sure the car is on flat ground and that the engine is cold.. If you are not sure which fluids are which, or you don’t know how to top them up or change them, your owner’s manual should provide you with a detailed set of instructions or you can also visit a nearby garage for a maintenance check on your car.
2. Check the brakes-
Checking the brakes is fairly simple as you will notice a difference in breaking while driving. If they feel lose you should get the system checked by a professional as this could be a sign that the brake fluid level needs topping up or is leaking. If you notice a vibration or shaking sensation while applying the brakes, then the rotors should be replaced. Any unusual noises could also signal that the brake pads have worn out.To check your handbrake is fully functioning, try pulling it up when positioned on an incline. If you need to pull the handle right up before the car is secure, chances are that the cable needs to be replaced.
3. Checking your Tyres-
Tyres with the wrong pressure can compromise braking, handling and grip. Over or under inflated tyres can also increase fuel consumption and are more likely to become damaged and worn.For this reason, it’s crucial that you check your vehicle’s tyre pressure every couple of weeks or so, including the spare.If you are unsure about what the correct tyre pressure is for your vehicle, check the owner’s manual. It’s also important to make sure that your tyres have enough tread, which will be shown on the wear indicators. Drivers should also look out for any signs of unusual wear or damage, such as cracks, bulges or punctures. If you notice any damage, take your car to the nearest garage to have it looked at by a professional.
4. Inspect your Belts-
Inspecting your fan belt or drive belt and timing belts is easier than you may think and it can help to prevent serious damage to your engine. At the front of your engine, you should find a number of rubber belts attached to various pulleys. These belts run the alternator, the power steering pump, the air conditioning, and various other accessories. When checking the belts, look out for signs of damage, including cracking, unusual wear or rubbing. If when the engine is running but the vehicle is stationary you hear a loud, unpleasant screeching from under the bonnet (which goes away when the car moves off), this is a big clue that suggests the belt has become damaged.If you notice any of these problems, it’s likely that the belt will need to be replaced. Failing to do so can cause further damage to other parts of the car and prevent the engine from working properly.
Finally, simple checks to your headlights, reverse lights, fog lights and turn signals can reduce the risk of a road accident and should be done regularly. Lights are vital for allowing you to see clearly while driving in the night and they also let others know your intentions. For that reason, you should make sure that all your lights are working properly at least once a week.